Label and Heat Shrink Printers

Heat Guns

Features:

• 2:1 Shrink Ratio (shrinks to ½ its original diameter)
• Meets requirements of SAE AMS-DTL-23053/5 (formerly MIL-I-23053/5, MIL-DTL-23053/5), Classes 1, 2 (Clear), and 3
• UL 224 VW-1 and CSA OFT recognized
• Maximum Continuous use temperature 135°C
• 12 standard colors: Black, Clear, Red, White, Blue, Yellow, Brown, Gray, Orange, Green, Violet and Yellow/Green
• Shrink Temperature of 120°C and operating temperature of -55°C to + 135°C
• Crosses to : Sumitomo B2, Raychem RNF-100, Alpha FIT-221, 3M FP301 heat shrink, Canusa CPX-100, LG GSHS-1635F
• Typical applications include: Insulation, Wire Identification, Wire Bundling, Mechanical Protection, Color Coding, Lightweight Harnessing, Physical/Electrical Protection of Components, Strain Relief, and Solder Insulation.
• RoHS compliant

2:1 Polyolefin Heat Shrink - Ordering Information (short lengths)

12 standard colors: Black, Red, White, Blue, Yellow, Brown, Gray, Orange, Clear, Green, Violet, Yellow/Green. Check Drop down menu for each size to see current stock. If an item is in the drop down but not in stock, lead time is usually less than 1 week.

Note: Tubing is always referred to by Nominal ID, not flat width. Flat widths are approximate, and are provided for reference purposes only.

Please note - all of the items on this page are non-returnable and have a one week lead time.

*Clear is Class 2. So 1/4" Clear would be AMS-DTL-23053/5-206

For $35 extra you can get our economy model heat gun. It has two air speeds, and a temperature control dial for temperatures ranging from 250° to 1100°F

$35

M23053 Color Codes:

-0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow, -5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White, -C Clear

Please note: If you wish to purchase small quantities of sleeving, please don't hesitate to send us an e-mail. We will be happy to refer you to one of our partners that sell this sleeving in all colors by the foot.

Other Items

Heat Guns

VT-1100 with 2 Air Speeds, and a temp. control dial for range of 250°F - 1100°F

Hot Melt Glue Film - Have you ever found that standard 3:1 adhesive lined heat shrink tubing is just too thick compared to regular 2:1 Polyolefin? We have a solution for you! With a thickness up to 1/3 the thickness of the adhesive layer in adhesive lined heat shrink, you can have a true thin walled adhesive lined heat shrink.

Mini Electric Heat Gun - Capable of temperatures up to 500F, with overheat protection, and consumes 350 Watts of power. Perfect for the budget conscious hobbiest who needs an inexpensive heat gun.