ESPAÑOL

877-263-3737

Fax: (888) 619-2010

Why pay retail?™
 
Heat Shrink Tubing | Cable Ties | Braided Sleeving | Bentley Harris | Label Makers | Heat Guns | Overstock Specials | Sample Requests | Contact Us

Label and Heat Shrink Printers

Heat Guns

3M™ MDT Medium Wall Adhesive Lined Heat Shrinkable Tubing

View Properties
 

Military Specification and Manufacturers' Cross Reference List

3M General Purpose and Adhesive Lined Heat Shrink Tubing
Tools and Accessories

 

More Heat Shrink Tubing

General Purpose and Adhesive Lined Heat Shrink Tubing

 

High Temperature and Chemical Resistant Heat Shrink Tubing

3M MDT Medium Wall Adhesive Lined Heat Shrinkable Tubing

3M MDT tubing is an excellent choice for mechanical and environmental protection under extreme conditions. With a high dielectric strength, heavy duty adhesive lining, and high temperature resistance, 3M MDT heat shrink tubing is perfect for long term insulation and protection over long periods of time, offering more flexibility than HDT or ITCSN. When the tubing shrinks the inner adhesive layer forms an adhesion layer between the tubing and the component or wire. This provides a watertight seal, protecting the connector and/or wire in direct burial and submersed applications

Features:

  • Shrink Ratio as high as 4:1 with melt adhesive inner lining (shrinks up to 1/4 its original diameter)
  • Longitudinal Shrinkage: up to 10%
  • Meets requirements of AMS-DTL-23053/15 (formerly MIL-I-23053/15), Class 2
  • UL 224 VW-1 flame retardant (jacket only)
  • Maximum Continuous use temperature 110°C
  • Shrink Temperature of 120°C and operating temperature of -55°C to + 110°C
  • Crosses to: Canusa CFM, same as 3M IMCSN, Tyco Raychem RMW, LG PMWT
  • Typical applications include: Electrical insulation - Ideal for exposed or underground applications providing good insulation, waterproofing and mechanical protection. Also suitable for Mechanical and abrasion protection, Physical/Electrical Protection of Components, Strain Relief, and Solder Insulation.

3M MDT Medium Wall Adhesive Lined Heat Shrink Tubing - Ordering Information

Color available: Black. 1 week Lead Time. 3:1 Medium wall heat shrink also available from another manufacturer and in stock

3M Part #

Min ID before shrinking

Max ID after shrinking

Wall thickness after shrinking
Length*

Price/pc

 
Jacket
Adhesive
MDT-0400
0.40"
0.15"
0.09"
0.01
4'
$8.75

MDT-0800

0.80"

0.22"
0.10"
0.01
4'

$9.50
MDT-1100
1.10"
0.37"
0.10"
0.01
4'
$10

MDT-1500

1.50"

0.50"
0.10"
0.02
4'

$12.50

MDT-2000

2.00"

0.75"
0.10"
0.02

4'

$25
MDT-3000
3.00"
1.00"
0.12"
0.02
4'
$38

MDT-4300

4.30"

1.50"
0.15"
0.02
4'

$45

*Also available in precut pieces. Please inquire.

For $35 extra you can get our economy model heat gun. It has two air speeds, and a temperature control dial for temperatures ranging from 250° to 1100°F

$35

 




Other Items

 

 

 

 

 

 

Heat Guns

VT-1100 with 2 Air Speeds, and a temp. control dial for range of 250°F - 1100°F

$35

 

Micro Therm MJ-600 - Pocket sized cordless refillable butane heat source. Great alternative to electric heat guns. Waterproof piezo electronic ignition, safety lock trigger, and a reflector shield for use with heat shrink.

$25

 

 
 

Home | Heat Shrink Tubing | Cable Ties | Braided Sleeving | Bentley Harris | Label Printers | Plastic Tubing | Heat Guns | Site Map | Contact Us

All material on this site is copyright © 2006-2009 BuyHeatShrink.com. Any reproduction without written permission from BuyHeatShrink.com. is strictly prohibited.