ESPAÑOL

Sample Requests

Why pay retail?™

Contact Us
Part Number Cross Reference
Heat Shrink Tubing | Cable Ties | Braided Sleeving | Bentley Harris | Label Makers | Heat Guns | Overstock Specials | Sample Requests | Custom Printed Heat Shrink | Contact Us

Label and Heat Shrink Printers

Heat Guns
 

2 to 1 Standard Wall PVC Heat Shrink Tubing


PVC heat shrink tubing is very similar to Polyolefin shrink tubing in several ways - PVC and Polyolefin can both be applied and shrunk in various conventional ways such that with a little training, just about anyone can use them. Shrink temperatures are low enough that no special equipment other than a basic heat gun, or flameless torch can be used. Both materials are highly resistant to common automotive, marine and aerospace fuels, as well as many household, and electrician/installers' cleaning fluids. Like polyolefin, PVC heat shrink tubing is suitable for low to medium voltage applications.

The major differences are in the areas of weatherability, toughness and appearance. Unlike polyolefin, any color PVC heat shrink can be used outdoors with little to no UV degradation seen over long periods of time. In the case of polyolefin heat shrink, it is highly recommended that only black be used outdoors. PVC has a much glossier appearance, and is also tougher, stiffer and much more scratch resistant than polyolefin. Run your fingernail across both - you'll see.

The final differences are: PVC has a lower shrink (and use) temperature than standard polyolefin heat shrink, and Lastly - PVC clear shrink tubing is water clear. Although polyolefin clear is see-through and you can read a label through it, PVC heat shrink is crystal clear.

Features:

  • 2:1 Shrink Ratio (shrinks to ½ its original diameter)
  • Meets requirements of SAE AMS-DTL-23053/2 (formerly MIL-I-23053/2, MIL-DTL-23053/2), Class 1, 2 (Clear)
  • UL 224 VW-1 and CSA OFT recognized
  • Maximum Continuous use temperature 105°C
  • 6 standard colors: Black, Red, White, Blue, Yellow, and Clear
  • Shrink Temperature of 100°C and operating temperature of -55°C to + 105°C
  • Crosses to : Sumitomo V, Insultab HS-105, Grayline HS105, Alpha FIT-105, 3M FP301 heat shrink, Canusa CVN-105
  • Typical applications include: Insulation, Wire Identification, Wire Bundling, Mechanical Protection, Color Coding, Lightweight Harnessing, Physical/Electrical Protection of Components, Strain Relief, and Solder Insulation.

2:1 PVC Heat Shrink - Ordering Information

PVC Heat Shrink Tubing

6 standard colors: Black, Red, White, Blue, Yellow, Clear. Check Drop down menu for each size to see current stock. If an item is in the drop down but not in stock, lead time is usually less than 1 week.

View Dimensions and Technical Specifications

1 week lead time for all colors. Colors are only available in bulk spools. **Special Summer Note - due to the hot weather in summer, most of our stock is kept in cold storage at the factory, so there is a 1 week lead time for all PVC bulk spools and most mini spools. Also, we do not accept returns on PVC Heat Shrink Tubing for any reason except if we make a mistake**

***Now available in Neon and Glow in the Dark colors*** View Page

AMS-DTL-23053

Nominal ID*

Flattened Width

ID after shrinking

ft/spool

Price/spool

Bulk Spool Ordering Mini Spools
/2-201

3/64"

1/16"

0.023

1000

$112
Select Color:
Mini Spool (100ft):
100
$28
/2-202

1/16"

1/8"

0.031

1000

$112.50
Select Color:
Mini Spool (100ft):
100
$28.50
/2-203

3/32"

1/8"

0.047

1000

$113
Select Color:
Mini Spool (100ft):
100
$29
/2-204

1/8"

3/16"

0.063

1000

$126
Select Color:
Mini Spool (100ft):
100
$31.50
/2-205

3/16"

5/16"

0.094

1000

$155
Select Color:
Mini Spool (100ft):
100
$36
/2-206

1/4"

3/8"

0.125

1000

$175
Select Color:
Mini Spool (100ft):
100
$44
/2-207

3/8"

9/16"

0.188

500

$105
Select Color:
Mini Spool (100ft):
100
$52.50
/2-208

1/2"

13/16"

0.250

250

$65
Select Color:
Mini Spool (50ft):
50
$28
/2-209

3/4"

1-3/16"

0.375

250

$89
Select Color:
Mini Spool (50/25ft): Ft/Spool :
50
$42
25
$32
/2-210

1"

1-9/16"

0.500

250

$125
Select Color:
Mini Spool (50/25ft): Ft/Spool :
50
$55
25
$41.25
/2-1.25"

1-1/4"

1-15/16"

0.625

250

$180
Select Color:
Mini Spool (50/25ft): Ft/Spool :
50
$69
25
$45
/2-211

1-1/2"

2-3/8"

0.750

100

$120
Select Color:
Mini Spool (50/25ft): Ft/Spool :
50
$84
25
$55
/2-212

2"

3-1/8"

1.00

100

$172
Select Color:
Mini Spool: Ft/Spool :
25
$95
1
$7.50
/2-3"

3"

5"

1.50

50

$149
Select Color:
Mini Spool: Ft/Spool :
25
$115
1
$10
/2-4"

4"

6-5/16"

2.00

50
$164
Select Color:
Mini Spool: Ft/Spool :
25
$125
1
$12

*Clear is Class 2. So 1/4" Clear would be AMS-DTL-23053/2-206

Note: Tubing is always referred to by Nominal ID, not flat width. Flat widths are approximate, and are provided for reference purposes only.

For $35 extra you can get our economy model heat gun. It has two air speeds, and a temperature control dial for temperatures ranging from 250° to 1100°F

$35
PVC Heat Shrink Tubing

M23053 Color Codes:

-0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow, -5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White, -C Clear


Please note: If you wish to purchase small quantities of sleeving, please don't hesitate to send us an e-mail. We will be happy to refer you to one of our partners that sell this sleeving in all colors by the foot.

 

 

Polyolefin Tubing

 

 

Heat Shrink Kits

Small Kit (180 pieces ranging from 1/8" to 1/2" ID 2:1 Polyolefin Heat Shrink in a polypropylene compartment storage box with hinged lid)

Polyolefin Tubing

1/8" 2:1 Polyolefin - (Black, Blue, Yellow, Red, White) - 15 pieces of each color - 2" per piece
1/4" 2:1 Polyolefin - (Black, Blue, Yellow, Red, White) - 6 pieces of each color - 2" per piece
3/8" 2:1 Polyolefin - (Black, Blue, Yellow, Red, White) - 10 pieces of each color - 2" per piece
1/2" 2:1 Polyolefin - (Black, Blue, Yellow, Red, White) - 5 pieces of each color - 3" per piece
***Also available in ALL BLACK
Small Kit - Select Color: $13

 

Large Kit (146 pieces ranging from 1/8" to 1" ID 3:1 Dual Wall Heat Shrink in a polypropylene storage box with handle and removable shelf)

Polyolefin TubingLarge Heat Shrink Tubing Kit

1/8" 3:1 Dual Wall Polyolefin - 45 pieces - 2" per piece
3/16" 3:1 Dual Wall Polyolefin - 45 pieces - 2" each, AND 4 pcs - 6" each
1/4" 3:1 Dual Wall Polyolefin - 20 pieces - 4" each
3/8" 3:1 Dual Wall Polyolefin - 10 pieces - 6" each
1/2" 3:1 Dual Wall Polyolefin - 8 pieces - 6" each
3/4" 3:1 Dual Wall Polyolefin - 4 pieces - 4" each, AND 4 pcs - 2" each
1" 3:1 Dual Wall Polyolefin - 6 pieces - 6" each
***Available in ALL BLACK, Half Black/Half Red, Half Black/Half Clear
Large Kit - Select Color Option: $55

 

Other Items

 

 

 

 

 

 

 

 

 

 

 

 

Heat Guns

VT-1100 with 2 Air Speeds, and a temp. control dial for range of 250°F - 1100°F

$35

 

Micro Therm MJ-600 - Pocket sized cordless refillable butane heat source. Great alternative to electric heat guns. Waterproof piezo electronic ignition, safety lock trigger, and a reflector shield for use with heat shrink.

$25

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VT-1100 with 2 Air Speeds, and a temp. control dial for range of 250°F - 1100°F

$35

 

 
   
 

Military Specification (M23053) and Manufacturers' Cross Reference List

Not sure what you need? Try our new Heat Shrink Selector

General Purpose and Adhesive Lined Heat Shrink Tubing

  
 
2:1 Polyolefin Heat Shrink (most popular)
3:1 Adhesive Lined Heat Shrink (available in 7 colors) 4:1 Polyolefin Heat Shrink  
 
3:1 Polyolefin Heat Shrink
 3:1 Medium Wall Adhesive Lined Heat Shrink 4:1 Adhesive Lined Heat Shrink  
 
3:1 Flat Heat Shrink (designed for use on Thermal Transfer Printers)
 3:1 Heavy Wall Adhesive Lined Heat Shrink 2:1 Adhesive Lined Heat Shrink  
 
3M™ Heat Shrink Tubing
PVC Heat ShrinkTubing
 Fabric Heat Shrink Tubing  

 

High Temperature and Chemical Resistant Heat Shrink Tubing
  Kynar, PVDF heat shrink Teflon Heat Shrink tubing (/12) FEP Heat Shrink tubing (/11)  
  Diesel Resistant Heat Shrink (DR-25, R-120, /16) Viton Heat Shrink (/13) Neoprene Shrink Tubing (/1)  

 

Ultra Thin Wall and Low Shrink Temperature (80°C)Heat Shrink Tubing
  Ultra Thin Wall Polyolefin Heat Shrink Tubing Ultra Thin Wall PVC Heat Shrink Tubing Low Shrink Temperature Polyolefin Heat Shrink Tubing  
Tools and Accessories
  Heat guns Custom Printing and Cutting Expandable Braided Sleeving  
  Heat Shrink Crimp Connectors Heat Shrink Tubing Assortment Heat Shrink End Caps  
  Heat Shrink Tape Electrical Tape Cold Shrink Tubing  
  Cable Ties Heat Shrink Printers Hot Melt Glue Guns  
         

Home | Heat Shrink Tubing | Cable Ties | Braided Sleeving | Bentley Harris | Label Printers | Plastic Tubing | Heat Guns | Site Map | Contact Us

All material on this site is copyright © 2006-2009 BuyHeatShrink.com. Any reproduction without written permission from BuyHeatShrink.com. is strictly prohibited.