Tapas Finales- Tubería de Encogimiento de Calor

Lista de materiales de encogimiento, y referencia de fabricantes, y AMS-DTL-23053

Otros Productos

Tapas Finales Encogibles por calor de Polyolefin

With their very heavy wall, adhesive lining, and high voltage rating, Heat Shrink End Caps are a great way to seal the ends of power and communications cables. They are used to form a pressure-tight seal on the end of the cable, and can be applied quickly and easily using a Pistolas de Calor, or a flameless torch.

The ideal heat shrink temperature for our heat shrink end caps is around 275°F (135°C). To apply the end cap follow these instructions:

1) make sure the cable lead or wire is clean and free of debris

2) Place the end cap over the wire end, and start heating it from the closed end.

3) Work your way towards the open end, evenly shrinking all around the cap.

4) Continue until the adhesive lining begins to seep out the open end.

Features:

Tapas Finales Encogibles por Calor

Informacion para Ordenar

Contactenos para precios al Mayor