Label and Heat Shrink Printers

Heat Guns

Features:

• 2:1 Shrink Ratio (shrinks to ½ its original diameter)
• Meets requirements of SAE AMS-DTL-23053/5 (formerly MIL-I-23053/5, MIL-DTL-23053/5), Classes 1, 2 (Clear), and 3
• 3280 Volt rated
• Maximum Continuous use temperature 105°C
• 12 standard colors: Black, Clear, Red, White, Blue, Yellow, Brown, Gray, Orange, Green, Violet and Yellow/Green
• Shrink Temperature of 60°C (full recovery at 100°C) and operating temperature of -55°C to + 105°C
• Typical applications include: Insulation, Wire Identification, Wire Bundling, Mechanical Protection, Color Coding, Lightweight Harnessing, Physical/Electrical Protection of Components, Strain Relief, and Solder Insulation.
• RoHS compliant

2:1 Shiny Polyolefin Heat Shrink - Ordering Information

12 standard colors: Black, Red, White, Blue, Yellow, Brown, Gray, Orange, Clear, Green, Violet, Yellow/Green. Check Drop down menu for color availability.

Note: Tubing is always referred to by Nominal ID, not flat width. Flat widths are approximate, and are provided for reference purposes only.

1 week lead time

For $35 extra you can get our economy model heat gun. It has two air speeds, and a temperature control dial for temperatures ranging from 250° to 1100°F

$35

Other Items

Heat Guns

Mini Electric Heat Gun - Capable of temperatures up to 500F, with overheat protection, and consumes 350 Watts of power. Perfect for the budget conscious hobbiest who needs an inexpensive heat gun.

VT-1100 with 2 Air Speeds, and a temp. control dial for range of 250°F - 1100°F

Hot Melt Glue Film - Have you ever found that standard 3:1 adhesive lined heat shrink tubing is just too thick compared to regular 2:1 Polyolefin? We have a solution for you! With a thickness up to 1/3 the thickness of the adhesive layer in adhesive lined heat shrink, you can have a true thin walled adhesive lined heat shrink.