Label and Heat Shrink Printers

Heat Guns

Features:

• Lower shrinking temperature than PVC, and higher use temperature
• Ultra Thin wall for confined/tight spaces
• 2:1 Shrink Ratio (shrinks to ½ its original diameter)
• UL 224 VW-1 300V and CSA OFT 150V recognized
• Maximum Continuous use temperature 125°C
• Standard color: Black
• Shrink Temperature of 100°C and operating temperature of -55°C to + 125°C
• Crosses to : Sumitomo F4, Raychem Versafit V4 (Versathin), LG GSHS-1635T
• Typical applications include: Insulation, Wire Identification, Wire Bundling, Mechanical Protection, Lightweight Harnessing, Physical/Electrical Protection of Components, Strain Relief, and Solder Insulation.

2:1 Ultra Thin Wall Polyolefin Heat Shrink Ordering Information

1 standard color: Black. Please note, for what is normally referred to as Thin Wall Polyolefin heat shrink, view our 2:1 Polyolefin shrink tubing page

View Dimensions and Technical Specifications

Note: Tubing is always referred to by Nominal ID, not flat width. Flat widths are approximate, and are provided for reference purposes only.

For $35 extra you can get our economy model heat gun. It has two air speeds, and a temperature control dial for temperatures ranging from 250° to 1100°F

$35

Other Items

Heat Guns

VT-1100 with 2 Air Speeds, and a temp. control dial for range of 250°F - 1100°F

Micro-Therm MJ-600 - Pocket sized cordless refillable butane heat source. Great alternative to electric heat guns. Waterproof piezo electronic ignition, safety lock trigger, and a reflector shield for use with heat shrink.