Label and Heat Shrink Printers

Heat Guns

Features:

• 2:1 Shrink Ratio (shrinks to ½ its original diameter)
• Meets requirements of SAE AMS-DTL-23053/5 (formerly MIL-I-23053/5, MIL-DTL-23053/5), Classes 1, 2 (Clear), and 3
• UL 224 VW-1 and CSA OFT recognized
• Maximum Continuous use temperature 135°C
• 12 standard colors: Black, Clear, Red, White, Blue, Yellow, Brown, Gray, Orange, Green, Violet and Yellow/Green
• Shrink Temperature of 120°C and operating temperature of -55°C to + 135°C
• Crosses to : Sumitomo B2, Raychem RNF-100, Alpha FIT-221, 3M FP301 heat shrink, Canusa CPX-100, LG GSHS-1635F
• Typical applications include: Insulation, Wire Identification, Wire Bundling, Mechanical Protection, Color Coding, Lightweight Harnessing, Physical/Electrical Protection of Components, Strain Relief, and Solder Insulation.

2:1 Polyolefin Heat Shrink - Ordering Information

12 standard colors: Black, Red, White, Blue, Yellow, Brown, Gray, Orange, Clear, Green, Violet, Yellow/Green. Check Drop down menu for each size to see current stock. If an item is in the drop down but not in stock, lead time is usually less than 1 week.

Note: Tubing is always referred to by Nominal ID, not flat width. Flat widths are approximate, and are provided for reference purposes only.

Lower shrink temperature (80°C) 2:1 Polyolefin also available

*Clear is Class 2. So 1/4" Clear would be AMS-DTL-23053/5-206

For $35 extra you can get our economy model heat gun. It has two air speeds, and a temperature control dial for temperatures ranging from 250° to 1100°F

$35

M23053 Color Codes:

-0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow, -5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White, -C Clear

Please note: If you wish to purchase small quantities of sleeving, please don't hesitate to send us an e-mail. We will be happy to refer you to one of our partners that sell this sleeving in all colors by the foot.

Heat Shrink Kits

Small Kit (180 pieces ranging from 1/8" to 1/2" ID 2:1 Polyolefin Heat Shrink in a polypropylene compartment storage box with hinged lid)

1/8" 2:1 Polyolefin - (Black, Blue, Yellow, Red, White) - 15 pieces of each color - 2" per piece

1/4" 2:1 Polyolefin - (Black, Blue, Yellow, Red, White) - 6 pieces of each color - 2" per piece

3/8" 2:1 Polyolefin - (Black, Blue, Yellow, Red, White) - 10 pieces of each color - 2" per piece

1/2" 2:1 Polyolefin - (Black, Blue, Yellow, Red, White) - 5 pieces of each color - 3" per piece

***Also available in ALL BLACK

Large Kit (146 pieces ranging from 1/8" to 1" ID 3:1 Dual Wall Heat Shrink in a polypropylene storage box with handle and removable shelf)

1/8" 3:1 Dual Wall Polyolefin - 45 pieces - 2" per piece

3/16" 3:1 Dual Wall Polyolefin - 45 pieces - 2" each, AND 4 pcs - 6" each

1/4" 3:1 Dual Wall Polyolefin - 20 pieces - 4" each

3/8" 3:1 Dual Wall Polyolefin - 10 pieces - 6" each

1/2" 3:1 Dual Wall Polyolefin - 8 pieces - 6" each

3/4" 3:1 Dual Wall Polyolefin - 4 pieces - 4" each, AND 4 pcs - 2" each

1" 3:1 Dual Wall Polyolefin - 6 pieces - 6" each

***Available in ALL BLACK, Half Black/Half Red, Half Black/Half Clear

Other Items

Heat Guns

VT-1100 with 2 Air Speeds, and a temp. control dial for range of 250°F - 1100°F

Micro-Therm MJ-600 - Pocket sized cordless refillable butane heat source. Great alternative to electric heat guns. Waterproof piezo electronic ignition, safety lock trigger, and a reflector shield for use with heat shrink.

Heat Gun

VT-1100 with 2 Air Speeds, and a temp. control dial for range of 250°F - 1100°F

VT-1100 with 2 Air Speeds, and a temp. control dial for range of 250°F - 1100°F