Label and Heat Shrink Printers

Heat Guns

• 3:1 Shrink Ratio (shrinks to 1/3 its original diameter)
• Meets requirements of AMS-DTL-23053/5 (formerly MIL-I-23053/5), Classes 1, 2 (Clear), and 3
• UL 224 VW-1 and CSA OFT recognized
• Maximum Continuous use temperature 135C
• Shrink Temperature of 100°C and operating temperature of -55°C to + 135°C
• Crosses to : Sumitomo B2(3X), Raychem RNF-3000, Alpha FIT-321V, Canusa CPX-300, LG GSHS-3635
• Typical applications include: Insulation, Wire Identification, Wire Bundling, Mechanical Protection, Color Coding, Lightweight Harnessing, Physical/Electrical Protection of Components, Strain Relief, and Solder Insulation.

3:1 pre-cut Polyolefin Heat Shrink - Ordering Information

6 standard colors: Black, Red, White, Blue, Yellow, Clear.

For $35 extra you can get our economy model heat gun. It has two air speeds, and a temperature control dial for temperatures ranging from 250° to 1100°F

$35

M23053 Color Codes:

-0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow, -5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White, -C Clear

Other Items

Heat Guns

VT-1100 with 2 Air Speeds, and a temp. control dial for range of 250°F - 1100°F

Mini Electric Heat Gun - Capable of temperatures up to 500F, with overheat protection, and consumes 350 Watts of power. Perfect for the budget conscious hobbiest who needs an inexpensive heat gun.

Micro Therm MJ-600 - Pocket sized cordless refillable butane heat source. Great alternative to electric heat guns. Waterproof piezo electronic ignition, safety lock trigger, and a reflector shield for use with heat shrink.