Label and Heat Shrink Printers

Heat Guns

Our 3:1 heat shrink tubing is also available with a "dual-wall" construction. When exposed to heat (usually a bit lower than the activation temperature of the heat shrink), the inner layer begins to flow (just like a hot melt glue). When the tubing shrinks and cools down, inner layer forms an adhesion layer between the tubing and the component or wire. This provides a water-tight seal, protecting the connector and/or wire.

Features:

• 3:1 Shrink Ratio with melt adhesive inner lining (shrinks to 1/3 its original diameter)
• Up to 15% longitudinal shrinkage
• Meets requirements of AMS-DTL-23053/4 (formerly MIL-I-23053/4), Class 3
• UL 224 VW-1 and CSA OFT recognized
• Maximum use temperature 135°C
• Shrink Temperature of 90°C and operating temperature of -55°C to + 110°C
• Crosses to : Sumitomo W3B2, Raychem ATUM, Alpha FIT-321, 3M EPS-300, Canusa CPA-100 , LG GSHS-3635W
• Typical applications include: Insulation, Wire Identification, Wire Bundling, Mechanical Protection, Color Coding, Lightweight Harnessing, Physical/Electrical Protection of Components, Strain Relief, and Solder Insulation.

Colors available: Black, Red, Clear, White, Blue, Green, and Yellow

3:1 Dual Wall Heat Shrink Tubing - Ordering Information

For $35 extra you can get our economy model heat gun. It has two air speeds, and a temperature control dial for temperatures ranging from 250° to 1100°F

$35

*Also available in reels and precut pieces. Please inquire.

M23053 Color Codes:

-0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow, -5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White, -C Clear

Heat Shrink Kits

Large Kit (146 pieces ranging from 1/8" to 1" ID 3:1 Dual Wall Heat Shrink in a polypropylene storage box with handle and removable shelf)

1/8" 3:1 Dual Wall Polyolefin - 45 pieces - 2" per piece

3/16" 3:1 Dual Wall Polyolefin - 45 pieces - 2" each, AND 4 pcs - 6" each

1/4" 3:1 Dual Wall Polyolefin - 20 pieces - 4" each

3/8" 3:1 Dual Wall Polyolefin - 10 pieces - 6" each

1/2" 3:1 Dual Wall Polyolefin - 8 pieces - 6" each

3/4" 3:1 Dual Wall Polyolefin - 4 pieces - 4" each, AND 4 pcs - 2" each

1" 3:1 Dual Wall Polyolefin - 6 pieces - 6" each

***Available in ALL BLACK, Half Black/Half Red, Half Black/Half Clear

Small Kit (180 pieces ranging from 1/8" to 1/2" ID 2:1 Polyolefin Heat Shrink in a polypropylene compartment storage box with hinged lid)

1/8" 2:1 Polyolefin - (Black, Blue, Yellow, Red, White) - 15 pieces of each color - 2" per piece

1/4" 2:1 Polyolefin - (Black, Blue, Yellow, Red, White) - 6 pieces of each color - 2" per piece

3/8" 2:1 Polyolefin - (Black, Blue, Yellow, Red, White) - 10 pieces of each color - 2" per piece

1/2" 2:1 Polyolefin - (Black, Blue, Yellow, Red, White) - 5 pieces of each color - 3" per piece

***Also available in ALL BLACK

3:1 Adhesive Lined Heat Shrink Tubing - Bulk Spools

Other Items

Heat Guns

VT-1100 with 2 Air Speeds, and a temp. control dial for range of 250°F - 1100°F

Micro-Therm MJ-600 - Pocket sized cordless refillable butane heat source. Great alternative to electric heat guns. Waterproof piezo electronic ignition, safety lock trigger, and a reflector shield for use with heat shrink.

VT-1100 with 2 Air Speeds, and a temp. control dial for range of 250°F - 1100°F

VT-1100 with 2 Air Speeds, and a temp. control dial for range of 250°F - 1100°F