Sample Requests


Why pay retail?™

Contact Us

Part Number Cross Reference
Overstock Specials | Sample Requests | Custom Printed Heat Shrink | Contact Us

Label and Heat Shrink Printers

Heat Guns and Tools

Google Plus Google Plus (+1)



Shrinkable Insulation Tape - Heat Shrinkable Tubing

View Properties

Heat Shrink Tape


Polyolefin Heat Shrink Tape

Have you ever had an application that required heat shrink tubing, but you can't remove the connector to get the tubing onto the wire? 4:1 heat shrink tubing isn't a high enough shrink ratio for you? Do you need a wrap around or slit heat shrink product? Perhaps Heat Shrink Tape is the best product for you.

Just simply wrap our adhesive lined heat shrinkable tape around your wire, like you would normal electrical tape. Fasten the ends with a cable tie, and shrink using our economical VT-1100 shrink wrap heat gun, cut off the cable ties, and you've got a water-tight seal without hours of labor reattaching your connector!

The ideal heat shrink temperature for our heat shrink tape is around 221°F (105°C).


  • Dual wall (adhesive lined) heat shrinkable tape, with internal wall of hot-melt adhesive provides excellent bonding to plastic and metals.
  • Forms pressure-tight and waterproof seal to communications, power cables and most electrical wires and cables
  • Shrink temperature of 105C
  • Continuous use temperature of up to 105C
  • 20 kV/mm (500 V/mil) minimum electric strength (e.g. 0.031"=31 mil= 15kV)
  • Adhesive lining will prevent moisture penetration, allowing for long term storage of cable


Heat Shrink Tape - Ordering Information

Tape Width
Wall Thickness
Feet per roll
Price per roll
Add to Cart
Adhesive Lined Heat Shrink Tape
0.8mm (0.031")


For $35 extra you can get our economy model heat gun. It has two air speeds, and a temperature control dial for temperatures ranging from 250° to 1100°F

Heat Shrink Tube


Operating Temperature Range
-55C to 105C
Shrink Temperature
Tensile Strength
12 Mpa minimum
Ultimate Elongation
350% minimum
Specific Gravity
ISO 1183
1.95 maximum
Dielectric Strength
IEC 243
20KV/mm minimum

Fluid Resistance

Lubricating Oil
Hydraulic Fluid

ISO 1817

no degradation

Other Items



Heat Guns

VT-1100 with 2 Air Speeds, and a temp. control dial for range of 250°F - 1100°F

Heat Shrink Sleeving



Micro Therm MJ-600 - Pocket sized cordless refillable butane heat source. Great alternative to electric heat guns.

Heat Shrink Tube




Military Specification (M23053) and Manufacturers' Cross Reference List

Not sure what you need? Try our new Heat Shrink Selector

General Purpose and Adhesive Lined Heat Shrink Tubing

2:1 Polyolefin Heat Shrink (most popular)
3:1 Adhesive Lined Heat Shrink (available in 7 colors) 4:1 Polyolefin Heat Shrink  
3:1 Polyolefin Heat Shrink
3:1 Medium Wall Adhesive Lined Heat Shrink 4:1 Adhesive Lined Heat Shrink  
3:1 Flat Heat Shrink (designed for use on Thermal Transfer Printers)
3:1 Heavy Wall Adhesive Lined Heat Shrink 2:1 Adhesive Lined Heat Shrink  
3M™ Heat Shrink Tubing
PVC Heat ShrinkTubing
Fabric Heat Shrink Tubing  


High Temperature and Chemical Resistant Heat Shrink Tubing

  Kynar, PVDF heat shrink PTFE Heat Shrink tubing (/12) FEP Heat Shrink tubing (/11)  
  Diesel Resistant Heat Shrink (DR-25, R-120, /16) Viton Heat Shrink (/13) Neoprene Shrink Tubing (/1)  


Ultra Thin Wall and Low Shrink Temperature (80°C)Heat Shrink Tubing

  Ultra Thin Wall Polyolefin Heat Shrink Tubing Ultra Thin Wall PVC Heat Shrink Tubing Low Shrink Temperature Polyolefin Heat Shrink Tubing  
Tools and Accessories
  Heat guns Custom Printing and Cutting Expandable Braided Sleeving  
  Heat Shrink Crimp Connectors Heat Shrink Tubing Assortment Heat Shrink End Caps  
  Heat Shrink Tape Electrical Tape Cold Shrink Tubing  
  Cable Ties Heat Shrink Printers Hot Melt Glue Guns  

Home | Contact Us

All material on this site is copyright © 2006-2015 Any reproduction without written permission from is strictly prohibited.