Label and Heat Shrink Printers

Heat Guns

Semi-Rigid Adhesive Lined Heat Shrinkable Tubing

Our heat shrink tubing is also available with a "melt-wall" construction. When exposed to heat (usually a bit lower than the activation temperature of the heat shrink), the inner layer begins to flow (just like a hot melt glue). When the tubing shrinks and cools down, inner layer forms an adhesion layer between the tubing and the component or wire. This provides a water-tight seal, protecting the connector and/or wire.

• Operating Temperature: -55° C to 110° C
• Shrink Temperature: 120° C
• Shrink Ratio: 3 to 1
• Longitudinal Shrinkage: up to 15%

Specifications/Approvals:

Military: AMS-DTL 23053/4 Class 1 (Formerly Mil-I-23053/4)
Underwriters Lab: UL 224 600V, 125°C, VW-1 (Jacket only), CSA

Crosses to: Sumitomo W5DL, Raychem SCL, Alpha FIT-300, 3M MW, Canusa CPA-300, LG GSHS-3625WS

For $35 extra you can get out economy model heat gun. It has two air speeds, and a temperature control dial for temperatures ranging from 250° to 1100°F

$35

Other Items

Heat Guns

VT-1100 with 2 Air Speeds, and a temp. control dial for range of 250°F - 1100°F

Micro-Therm MJ-600 - Pocket sized cordless refillable butane heat source. Great alternative to electric heat guns. Waterproof piezo electronic ignition, safety lock trigger, and a reflector shield for use with heat shrink.